BKWBC - M & M L-203-D

  • MSDS: BKWBC
  • Manufacturer: SLIDEX CORP
  • Product Name: M & M L-203-D
  • National Stock Number: 6850-00F017559
Product Identification

Product ID:M & M L-203-D
MSDS Date:11/13/1985
FSC:6850
NIIN:00F017559
MSDS Number: BKWBC

Responsible Party
SLIDEX CORPORATION
40-19 23RD STREET
LONG ISLAND CITY, NY 11101-4818

Emergency Phone: (212) 392-4042

Info Phone: (203) 259-7861 EXT 250 OR 215

Cage: 4Z298

Contractor
SLIDEX CORPORATION
LONG ISLAND CITY, NY 11101-4818

Telephone: (203) 259-7861 EXT 250 OR 215

Cage: 4Z298

Ingredients

PETROLEUM WAX BLEND

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DIZZINESS, HEADACHE,
RESPIRATORY IRRITATION, & UNCONSCIOUSNESS. SKIN: BURNS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DIZZINESS, HEADACHE, RESPIRATORY
IRRITATION, & UNCONSCIOUSNESS. SKIN: BURNS.

First Aid

First Aid:SKIN: IF BURNED BY HOT WAX, QUENCH W/COLD TAP WATER. DRY BURN
AREA & LOOSELY COVER TO PROTECT AGAINST INFECTION. DON'T APPLY
OINTMENTS OR SALVES. INHALATION: REMOVE TO FRESH AIR. OBTAIN
MEDICAL ATTENT ION IN ALL CASES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:>500F
Extinguishing Media:CO2, WATER SPRAY OR FOG, FOAM, & DRY CHEMICAL.
Fire Fighting Procedures:COOL EXPOSED CONTAINERS W/WATER SPRAY.
Unusual Fire/Explosion Hazard:PRESSURE INCREASES IN OVERHEATED, CLOSED
CONTAINERS.

Accidental Release

Spill Release Procedures:REMOVE IGNITION SOURCES. EVACUATE AREA.
RECOVER LIQUID. ADD ABSORBENT SUCH AS SAND, SAWDUST TO SPILL AREA.
VENTILATE AREA. OPEN ALL WINDOWS & DOORS.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DON'T HANDLE OR STORE NEAR HEAT OR FLAME.
Other Precautions:AVOID BREATHING FUMES & CONTACT W/SKIN.

Exposure Controls

Respiratory Protection:NORMALLY NOT REQUIRED. USE A RESPIRATOR FOR
MIST.
Ventilation:LOCAL EXHAUST: FACE VELOCITY >60 CFM.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH SKIN THOROUGHLY W/SOAP & WARM WATER AFTER HANDLING.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:>600F
Melt/Freeze Pt:M.P/F.P Text:158-163F
Vapor Pres:1
Vapor Density:>1
Evaporation Rate & Reference:(BU AC = 1): 1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT YELLOW SOLID, ODORLESS.
Percent Volatiles by Volume:0.01%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Stability Condition to Avoid:EXTREME HEAT, FLAME, OR OTHER SOURCES OF
IGNITION.
Hazardous Decomposition Products:FUMES, SMOKE, & CO.

Disposal

Waste Disposal Methods:DISPOSE OF ABSORBED MATERIAL AT APPROVED WASTE
SITE IN ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS. DON'T
ALLOW PRODUCT TO ENTER SEWERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.